The plummer block bearing unit SAPP-201 consists of the radial insert ball bearing SA201 and the steel sheet housing PP201.
the bearing insert has an inner ring extended on one side and a spherical outside surface profile of the outer ring and is fixed with a grub screw; the galvanized plummer block housing (steel sheet) is equipped with two bores for fixing
suitable for low loads; misalignments can be equalized by spherical bearing seat
steel sheet is extremely favourable and space-saving
its temperature resistance ranges from -20°C up to +120°C, in case of plastic seal up to +100 degrees Celsius
| select | Inquiry | Unit No. | Shaft | Shaft Height | Mounting Hole | Housing Length | Housing Width | Basic Dynamic Load | Basic Static Load |
|---|---|---|---|---|---|---|---|---|---|
| Diameter d | H (in) | Center-to-Center J (in) | L (in) | A (in) | Rating (Cr) lbs | Rating (Cor) lbs | |||
| SAPP207-23 | 1-7/16 in | 1.5625 | 4.1732 | 5.0787 | 1.6535 | 5777.59 | 3439.58 | ||
| SAPP207-35MM | 35 mm | 1.5625 | 4.1732 | 5.0787 | 1.6535 | 5777.59 | 3439.58 | ||
Download PDF
Printable Page